DT-2730MS

27" Diagonal Color Video/Data Multi-Scan Monitor

Covers wide range of applications such as NTSC, PAL, VGA, SVGA and MAC Quadras
Need for interfaces are minimized with direct-connect P.C. and MAC connecting.
Powerful internal Dome stereo speakers and Speaker Out connectors for a variety of audio monitoring options
Flexible Preset Memories for Input Signal and Picture Controls keep adjustment time to a minimum
Supports multiple monitors with Address ID
Large or small systems are easier with convenient Remote Controls for various configurations: Wireless and RS-232C Communication Port
Digitally controlled Front Panel
"Smart" Input Selector automatically indentifies the input and locks to it
Conforms to user's viewing environment with Selectable Color Temperature

Specifications:

Power Source	100 - 240 Volts AC, 50/60 Hz
Power Consumption	340 Watts max.
Dimensions (W x H x D)	26 3/4" x 22 1/4" x 20 7/8" (678 x 565 x 530 mm)
Weight	127.6 lbs. (58 Kg.)
Picture Tube	27" Diagonal, Flat Square, Invar Shadow Mask, P22 Phosphor
Dot Pitch	0.8 mm
Maximum Brightness	65 Ft.L at Flat White Field
Horizontal Resolution RGB: Video:	800x600@72Hz (1280 x 1024@60Hz emulation) 600 TV Lines composite
Bandwidth RGB: Video:	30 MHz 6 MHz
Scan Frequencies Horizontal: Vertical:	15 - 64 kHz 45 - 160 Hz
Supported Standards Composite Video: S-Video: Computer:	NTSC/PAL NTSC/PAL 640 x 400 VGA(70Hz), VESA VGA(84Hz) 640 x 480 VGA(60Hz), VESA VGA(72Hz) Apple Macintosh II and Quadra (66.67Hz) 800 x 600 VESA SVGA (56Hz/60Hz/72Hz) 832 x 624 Apple Quadra 16" Mode 1024 x 768 8514A interlaced, VESA (60Hz/70Hz): non-interlaced, Mips (71.6Hz)
Internal Audio Amplifier	5 Watts (x2)
Remote Control Connector	RS-232C D-sub 9 pin
Input
Front Computer	15-pin D-sub (x1)
Video	RCA (x1)
S-Video	4-pin DIN (x1)
Audio	RCA for Video (x1)
Back Computer	15-pin D-sub, 15-pin HD-sub (x1)
Video	RCA (x2) BNC (x1) Parallel to Video 2 mode
S-Video	4-pin DIN (x2)
Audio	RCA for Video (x2) RCA for Computer (x1)
Output
Back Computer	15-pin D-sub 15-pin HD-sub (x1) Common to Input Terminal
Video	BNC (x1)
S-Video	4-pin DIN (x1)
Audio	RCA for Video (x1) RCA for Computer (x1) RCA for Auxiliary (x1)
Digital Memories
Factory Presets	14 for signal types: NTSC, PAL, Apple Macintish II, 640 x 400 VGA(70Hz), VESA VGA(84Hz) 640 x 480 VGA(60Hz), VESA VGA(72Hz) 800 x 600 VESA SVGA (56Hz/60Hz/72Hz) 8514A (1024 x 768, interlaced) 1024 x 768 (non-interlaced, 60 Hz/70Hz/72Hz)
User Memories	6 (Input Selection, Volume, Brightness, Contrast, Sharpness, Color, Tint, H. Size & Position, V. Size & Position, Trapezoid, and Side Pin Cushion)
User Controls	Power On/Off, Contrast, Brightness, H. Position, H. Size, V. Position, V. Size, Pincushion, Deguass, Trapezoid, Color Temperature, Color, Tint, Sharpness, Volume, Mute, Mode Selection (Audio/Manual-PC/Video), Memory Reset, Monitor Selection (Addressable)
Regulations	UL. CSA. DHHS. FCC-A. DOC. PTB.
Accessories	Power Cord 15 pin D-sub to HD-sub cable Handheld Remote Control

[ Home | Products | Introduction | Contact Us ]

Telestar Corp. 21328 Montecito St., Walnut, CA 91789
T: 909 598 3636 F: 909 468 5959

Copyright 1999, Telestar Corp.©.
All Rights Reserved Worldwide.

The information contained on Telestar Corp.'s web site if not intended to be comprehensive of Telestar Corp's capabilities and areas of expertise. Only Telestar and TeleScenic are trademarks of the Telestar Corporation. All other trademarks belong to respective manufacturers.